Currently, Point Auto Trigger only allows for a radius to be set. This creates a cylinder that has no ends and allows for points to be taken anywhere inside the diameter created...even if its 1000mm away from the target. Often times the point is taken on the wrong side of the part by the operator... Please add a control for the max distance from the surface similar to that used for laser scanner features.

Help files attached to the icons. Hover over the icon and get a pop up (help?)that links you to the help files associated to the icon.

Create 3d Cad features from the features created in the program. Use the upper and lower tolerance to create boundaries then use the measured value to confirm the features are in tolerance visually. Apply datum shift to allow a virtual fit up. Features that don't "fit up" appear red and a list of features is also reported "like collation detection". Works with legacy or exactmeasure...

I've not found how to turn of the alarm when it's in a loop anywhere in the help files unless I've missed it from going mad at the sound; Short of turning the volume levels off, which defeats the purpose.

ABSOLUTE MOVE POINT SHOULD BE VIEWED AS A VISIBLE OBJECT LIKE A REGULAR POINT SO IT CAN BE EASILY FOR MODIFYING

As many benders have the ability to display separately the XYZ & LRA errors / corrections and the operator can opt to directly edit & apply these values after a performed inspection, it is desired to include them in the report (Supravision Network protocol fields: $exyz & $elra).

Add (enhance) the ability to create multiple auto features in on go.

I know you can create multiple auto features in one go by left click dragging a box around them, but it always picks up several 'hidden' features which aren't wanted, and yo get no say in the order of them.

What would be ideal would be ctrl+click (like selecting multiple discrete items from a list box) to select multiple features at once.

When extracting 3D features such as cylinders, cones and other features of size without CAD model, select tool would be great addition to PCDIMS. Also extracting and exporting 2D splines from pointcloud to different file types to make tool path definitions from the scan.

Tool or script that can open all programs in a directory and do a "Find and Replace" on program code. For example: if you had a command like EXTERNALCOMMAND/NO_DISPLAY, NO_WAIT ; C:\FOLDER\EXTERNALCOMMANDTHATIWANTTORUN.EXE and you wanted to change it to EXTERNALCOMMAND/NO_DISPLAY, NO_WAIT ; C:\FOLDER\DIFFERENTEXTERNALCOMMANDTHATIWANTTORUN.EXE, currently you have to open-edit-close on all of the programs. In situations where there are many programmers or there are many programs, this would be a useful tool for managing the edits required on an entire directory.