Hi! 

A common way of designing in certain fields is to have 2 internal cylinders to cross/pierce eachother. Therefore when choosing to scan these cylinders, having a jump hole feature same or similar to the one existing on plane scans would be of great use, instead of having to program multiple auto circles and/or cylinders. A nice additional feature to add to this would be to be able to choose to either jump by distance or angle, depending on how the part is toleranced. 

Great place to have it would be in the setup window.

Hi Could a traffic light system be implemented to see what level a program is at. currently I would just do this through naming convention of the program but this could end up me having multiple programs that aren't necessary.

Green - Proven, Up-to current revision

Amber - Un-Proven / Revision Change needed

Red - Unproven Program / Quarantined

I like to get the actual selected and executed Miniroutine(s) by automation. A function like GetActiveMiniRoutine() on Part level can be a solution.

When measuring with the optics, it should be possible to superimpose an overlay on the live image.

Similar to a wireframe model or a DXF contour, the lines of the nominal geometries should lie over the camera image.

This allows the operator to visually compare the actual and nominal contours, just like with a projector. Furthermore, the customer wishes to carry out manual measurements in the live view between the nominal and actual contour. Such as distances, angles etc.

Good Morning,

In the home page when I create a new file, I can not save my new file routine on a folder choosing by me.

Beacause I think there is a default folder already defined by PC-DMIS, but it is a folder that is located in an APPdata folder. This means we have to copy to the folder we want.

Can you do an improvement so that I can choose a folder to save my file?

Best Regards

I'm looking to have an auto calibrate command for all probes/tips within a single routine that have been calibrated outside a specified range. With this, it would also be nice to have a way to see all used probes and tips within the routine without having to go into each probe individually and select mark used. Currently we calibrate probes by opening each probe (F9), selecting mark used and looking at the calibration dates/times. If it has been outside of 24 hours we typically calibrate only the necessary tips. I'd like a way to do this automatically, and to be able to use this command from a form.

Thanks

I would like an option to alphabetize inspection reports.  I typically inspect parts to a ballooned drawing.  I resort to saving all my dimensions until the end of my program and name them BALLOON1, BALLOON2, etc.  The problem is when I have a part with hundreds of balloons, I'm hopping around from alignment to alignment and workplane to workplane. It would save time if I could create the dimensions as I'm creating features so that I'm recalling alignments and switching workplanes less often.

Clearance cube works well for square/rectangle parts but not ideal for cylindrical shaped parts. A clearance cylinder would work well for round parts that have features i.e. circles etc... on the outer perimeter of the cylinder.

Mein Idee beinhaltet dass beim Auto Element Kreis Scan auch Stützpunkten möglich sind. 

Aktuell ist dies nicht möglich.

My idea is to program the scan with the auto element circle also with interpolation points.
Currently this is not possible.