Add a key in the calibration area where you can save and import a list of angles because every time you create a probe you have to start from zero.

CMMs need the option to have wireless jog boxes. I trip over the cord all the time and wheel over it with my chair.

Looking for a way to populate results in specific custom order in Excell based first article travelers.

UK customer has requested a way in Inspect to specify a % of tolerance, and if dimensions are within tolerance, but above the % of tolerance, they would be marked in yellow on the dimension summary screen at the end of execution.

Would like to be able to view the CAD model within the Inspect user interface while the program is executing. Similar to the current Operator mode functionality.

Now PC-DMIS remembers only measurements made on the last part. A lot of time I need a complete data of part that was measured in past. It could be set to remember last xx measured parts. I know that Calypso has this feature.

Add options to construct Datum features in such a way that they reflect the standard.

Example - Datum A is a Plane, and Datum B is a cylinder bore nominally perpendicular to the plane.

As per both ISO and ASME standards, Datum B would be a Max Insc Cylinder Perpendicular to Dat A.

It's easy enough to construct a Max Insc cylinder, but this wouldn't be forced perpendicular to the plane, currently you'd have to measure it as a series of circles, then construct a Max Insc Circle in the correct workplane after levelling to Dat A.

See bottom image for example (image shows shaft not bore but principle is the same).

Like wise construct a datum plane from a measured plane relative to another feature (Top image)

Your program is finished but some points or features were added and their out of numerical order.

A Re-number feature would put them all in ascending order.

It would be nice to see an addition of a 'single block' mode, similarly to CNC machines where you can step through each line/block of code one at a time. This would be good for proving out program or certain sections of programs. This would be better than having to CTRL+E each line to make sure things dont crash.

Adding a single block toggle to the execution popup window while executing would have the user click the play button/green button on the jogbox to advance each block.

Can we get some way to record what version/schema of PC-DMIS is required to open a particular PC-DMIS file?  With the rolling cutoff and some users having a mix of schema for their routines, I fear difficulties with using the migration utilities in the future.