Ability to insert balloon symbols into dimensional report. ie triangles, diamonds etc

I'd like to be able to right click a cell in the report header and edit its contents. 

We would like the ability to break a scan into multiple elements that may have different tolerances or requirements for each.

The option to extract individual point data from auto features, so that I can report xyz values for a single point.

As a user of PC-DMIS, I like to see the used qualification parameters (Prehit, Retract, TouchSpeed, MoveSpeed and NumberOfHits) in the results file. This will help to analyze if a setting was not aligned with the used parameters in a measurement routine which can cause significant deviations in the measurement results.

While hardcoding things in PC DMIS, we often run into "line length error" issues and have to break things up into multiple-multiple-multiple feature-sets. Can you please consider eliminating the line error issue if at all possible..or..giving us a lot more room for lines? 

If I can CONSTRUCT a plane with 5000points and see all of them listed in my edit window why can't we do the same with featuresets/while hardcoding? 

Thanks for your time. 

The Idea is to program an Auto Circle and RT is used to position the RT and take the hit on a circle,move RT take next hit, move RT tae next hit. This is a request of MTU.

This is an important function and will help all blisk manufactors which use PC-DMIS Scanning with and without rotary table. Then it is possible to calculate the biggest Diameter on a blisk.

Too many times has PC-DMIS crashed while creating an offline program, I have worked with multiple other CMM software's where they provide many options for keeping what you have worked on and not loose a days work.

if PC-DMIS could enter a setting to auto save at different intervals like 5, 10 or 30 minutes would help a programmer from loosing much work, trying to remember to save it is not always achievable.