When I create a part loop for 100 parts I would like the ability to run probe 1 on all 100 parts before switching to probe 2 and starting at part 1 again with the correct alignment.  If i create both probes in same loop program it takes more time changing probes than it does checking each part. The loop does create the alignments like this ABC[1] right now but once out of the loop and switching to probe 2 their is no way to recall alignment ABC[1] and start from part 1 thru 100 again. This would eliminate having to create external alignments using variables.

Add a backup folder to the Set Search Path list.  When program is protected also back it up to the backup folder.

The ability to modify targets without effecting alignment changes. 

Currently if I mirror a program or change an alignment - my target formula does not change it's nominal value.  Therefore the CMM drives to the wrong place.  Sometimes by 1000's of mm.  Because this is not supported in this way our company frowns upon the use of assignments.

Add the Ability to reposition the Restored Saved Layout Icons within the Windows Layouts Toolbar. 

Example:

Reposition and Delete Saved User Layouts 

To Reposition or delete a saved user layout:

1. Right-click on the toolbar area, and select Customize. The Customize dialog box appears.

2. Press and hold the Shift key on your keyboard.

3. Click and hold the mouse over the icon on the Window Layouts toolbar. The icon becomes movable.

4. Drag the icon outside of the toolbar's boundaries to delete or move to new location within the toolbar.

5. Release the mouse button.

The ability to home the machine at the start of a new work shift should be part of the standard menu features.  You should not have to completely shut the machine down to home out the machine.  No matter how up to date and  complex the new software packages become it is always a good practice to home the machine. 

qual è l'allineamento iterativo rispetto all'allineamento geometrico?

Probably one of the most obnoxious and useless prompts is the ""Measure All iter align features now?"" It comes up every time you modify a feature related to an iterative, plus one more for every other instance of an iterative alignment in your program. So hypothetically, if you have 3 iterative alignments in your program, and you modify a single point in one of them, you'll receive three prompts,

Not to mention, the prompt does come up inexplicably sometimes. So sometimes when you're hammering through the also obnoxious, barrage of prompts, you get when you change a feature like "Do you want to update measured values", "Do want to make this the default ID", "Update dependent commands", where you may swapping back and forth between selecting "Yes", "No", in rapid fire succession because you're trying to get work done, let's through a command in there that throws the machine into automatic motion regardless of where the probe head actually go inspect something on the other side of the part, smash into said part, and break a four or five grand probe. Splendid... just great...

Additional view settings such as adding a delay to measured vision features. 

Ex.  I measure a feature, then for a x.xx seconds (whatever I choose) the live view pauses accordingly to show the measured hits.  An additional toggle of accepted and unaccepted hits would also be nice.

With version 2019 the help (F1) is accessible trough the browser. My experience is very bad. The search is slow, opening is slow too. I just can not use it, it is unusable!!! Make it fast and simple like it was before.