Optimize Path Summary will show a list of Uncalibrated Tips. Uncalibrated tips list shows all the uncalibrated tips used by the optimization. You can click on a tip and click Calibrate tip to open the Probe Utilities dialog box and calibrate the uncalibrated tips.

-

The problem is that the Tip that is selected in the Uncalibrated tips list will not be Highlighted in the Probe Utilities dialog box Active Tip list.

 -

Selected the Uncalibrated Tip.

Selected Calibrate tip. Now Enjoy your search.

Report window update while program is ruynning

Hi,

The the show probe button in graphic Item toolbar was a very useful buton. So thanks for developers! And I suggest more button: Show only the probe ball button.

Many times I want to check visual the gap between the ball and the part and so many times the shaft of the last item(probe) hide all things what I want to see...

I have many big parts with many elements to check.

The biggest problem, what I have, is when I set the elements on a flat (when this are shading)  I can´t see this from all positions.

Can you make the flat transparent or the elements just like to shape, that we can see all elements on a flat in al positions?

I'd like the ability to calculate the area between 2 somewhat concentric circles, or even irregular shaped features and dimension that area.

With legacy dimensioning, in the profile dimension box you could highlight all the features you wanted and when you hit create it would create an individual dimension for each feature. With XACT dimensioning it produces a feature set and one dimension shows on the report. Can you make it to where you could have the option of grouping the features into a feature set or have the option to mass create individual dimensions for each feature instead of having to choose each feature one at a time and hitting create?

since the animated machines are included with the pcdmis software, shouldnt the animated probe changer be included as well? Apparently this is a paid addon currently, but would be handy for offline path movement and collision detection.

Tienen la capacidad de construir elementos (círculos, conos, esferas, cilindros, etc.) con diferentes segmentos angulares (0º a 45º, 90º a 135º, etc.) dentro del mismo elemento.

Add ISO286 tolerance choice possibilities (h5, JS6 etc) to new size window, like old location.

Actual we have a minor bug in 2017 R2 SP5 If we choice outer diameter 8 h5 in location first the minus tolerance appear positive. If we push create after the good negative appear in edit window and reopen the dialog we show negative too. But firstly show positive :-(.

Is new size type
analysis we need to type the tolerance manually. In these place would
be great if we can to input ISO 286 tolerance too...

[scenario] Create a measurement routine with adaptive scanning measurement strategies. Open that routine on a cmm without an analog scanning probe, that gives an error message.

What would be handy for shops with multiple cmm types, is to have a way to change (temporarily) the measurement strategy to a type the cmm supports based on its probing type, based on the defaults stored in the measurement strategy editor.

Most of the time, I use adaptive scanning to improve throughput on the cmm's. But there are still cmm's with only TTP modules on them. I use the same measurement routine on several cmm's, but the adaptive scanning makes this difficult since the ttp does not support it.  Each cmm type has its own identifier so that the reporting gives the type of cmm used to verify the product. Thus there is traceability to the type of measurement strategies used to verify product.