2019-05-28 12_21_34-7337543_AD_LI_RADHAUS_A....png
2019-05-28 12_21_22-7337543_AD_LI_RADHAUS_A....png
2019-05-28 12_20_14-.png

In other Measuring Software you can show the trimline of sheet metal work pieces, like Pcdmis do it in cross section and line profile. But it is not possible to use for trimlines, because of the high deviation or the contour of the trimline. It would be nice, if it worked like the cross section.

Command Mode

New Mode - Field Editor Mode (or Filter mode?)

Basically it's command mode - except you can filter what it shows:

Example - Avoidance moves only (probe)

Example - light settings only (vision)

Example - Measure Now/Remeasure

Example - Relative Too

It would also be nice, that if you are in this mode PCDMIS would see that you are not changing anything relevant to an alignment - and thus the prompts would act accordingly.

An Auto Square slot that also checks corner radius. Reports center location, length, width, and corner radius. 

When selecting holes with a composite pattern true position requirement the tolerancing window automatically filters the selectable holes to only list holes of identical sizes.  Previous versions of PC-DMIS would let us select holes of any diameter from the tolerancing window to include in a pattern requirement.

EXCELFORMREPORT does not allow the individual points of form tolerances to be output, only the min/max and measured values. For customers with point maps it would be nice to be able to see all of the form deviations.

Currently EXCELFORMREPORT does not allow you to set the whole path, only the directory where the files go. It would be convenient to set the full path, similar to how the print command works. 

We read in the full path of the report name from a file because we often have reports that need to relate to each other so the initial part of the name needs to be the same

Is it possible to replace the measured value of the workpiece with a variable in the TempComp command?

I'd like to see the "Show Report" checkbox added to the new Excel Form Report to give users the same report viewing option they have in Report Print Options.

Fairly often I am programming and could also be calibrating tips.   It would be neat if this was optimized to perform this way. 

Sometimes I'll save my online program, create a dummy program and calibrate tips and move to my online program offline and programming depending on the amount of tips being calibrated.  Even this sometimes causes some difficulties. 

It would be nice to have a possibility to cancel the global search feature.