We have irregular contours (turtle, Easter eggs, seahorses) and need the area and their from closed scans.

Our competitors are already working with this for a long time.

Summary: Be able to use splines-filters with either UPR and/or Wavelength. Also a closing ball filter could be very useful. To my knowledge we are not able to filter features using a spline-filter with a cutoff based on either a wavelength or UPR (only a smoothing parameter).

Description:

With the more frequent use of scanning probes and the relatively new ISO-standard 1101:2017 describing filters, filtering is becoming more important and at the same time more often used. The definition of the Tolerance indicator has changed slightly and therefore filters are being applied much more often.

It would be very nice if PC-DMIS could support these functions directly in the "FCF-dialogue" or at least be able to create the features using the correct filtering parameters. For example add it as an available filter (same place as the gaussian filter) in the auto features and construct feature dialogue.

An example from the standard is cylindricity using a spline long-wave pass filter with cutoff values of 0,25mm in the axial direction and 150 UPR in the circumferential direction.

As a new user I feel a useful feature would be a live datum precedence table that updates as datums are locked down, identical to the one used in the CMM 101 class. So for instance in the alignment utilities dialog you select PLN1 as your Z+ level, the table updates with check marks under Z, V, and W. At which point you can clearly see what remains to be locked down (X,Y,U).

Hi,

It would be great if improve the windows.

-Feature theoretical area maybe changeable hide /extend. 

Feature list long (in red circle) sometimes would be great if extend by modify the full size of windows bottom-right corner pulling...

PCDLRN.exe closing issue is one of PC-DMIS most coming issue that never been completely solved. PC-DMIS is the only software that I have ever used that needed the Task manager to end the software at this level. How many years will it take Hexagon to completely fix this issue. If you use PC-DMIS, you will sooner than later get to know the Task Manager very well. 

Hello everybody,

We are looking for a way to define a Limit of Intervention for our workers for certain characteristics.

The Background to his is that it does not help us to tighten the Intervention Limits for the complete Evaluation because in punching Technology we deliberately always run holes on the largest possible Diameter and then These must not be marked accordingly.

Hallo zusammen,

wir sind auf der Suche nach einer Möglichkeit, dass wir für unsere Werker für bestimmte Merkmale individuelle Eingriffsgrenzen festlegen können. Hintergrund ist, dass es uns nicht hilft, wenn wir die Eingriffsgrenze für die komplette Auswertung anziehen da wir in der Stanztechnik beispielsweise Löcher bewusst immer auf dem größten möglichen Durchmesser produzieren und diese dann aber nicht entsprechend als Eingriffsgrenzen Verletzung gekennzeichnet werden dürfen. 

Ziel: Eingriffsgrenze für einzelne Merkmale anstatt komplettes Protokoll.

In the new Excel form, if i export a FCF dimension that uses Material condition, I have no information about the bonus value that was used, but only the nominal/tolerance values.

If my Excel form uses a formula to calculate deviations or other values in excel i will get a wrong calculation.