Many customers have large enough machines and smaller parts facilitating the ability to load multiple fixtures on the machine.  It would be helpful to have the ability to specify spacing between fixtures to execute sequentially.

This could possibly be done with fixture alignments rather than spacing for provision where the spacing may not be uniform.

Hello,

we need to have the option to show the vectors of the deviation in our protocol.

It is possible in the graphical window in PC-DMIS, so why isnt it possible in the "CADONLY" protocol e.g.?

Here is a screenshot what I mean:

Thanks in advance

Using 2021.1, an "analysisview" command of a feature control frame that uses the "U Modifier" will ONLY allow us to put on the inspection report an "analysisview" of a BILATERAL tolerance band. 

Please add the capability for us to show the tolerance band as UNEQUAL. 

add a color scheme to the summary view, similar to the edit window color scheme that can be saved and recalled.

Add a feature in the screen for editing a feature (plane, cylinder, etc) to assign it as a datum instead of going through dimension datum screen and/or gd&t dimension. 

Regarding the "To Points" toggle in the auto-feature dialogue box..

Would it be possible to make this toggle work for every type of auto-feature?

Right now, you can only use "To Points" on autocircle, autoplane, and autocylinder. The toggle is "grayed out" for lines, cones, spheres, etc. Adding this functionality would be a good enhancement IMO. 

Thanks for your time,

-Dan

In the calibration cycle, the possibility that the probe moves to the center of the calibration sphere before the next rotation move. This is useful if using a small CMM. It saves room and the eliminates the chance of a collision with the CMM support legs. 

We have new workstations with 4k monitors but the behavior of PCDMIS was disappointing while switching to the desired resolution with suitable scaling for our monitors.

We are using PCDMIS 2019 R2, with NVIDIA Quadro P4000

Here some screenshots for demonstration

Current Windows settings with 1920x1080 / 100%.

So it looks now with loss of edge sharpness, which has particularly bad effects on the graphics window.

This is our solution at the moment, but the screen is slightly blurry.
We had imagined differently, especially working with CAD models.

If we set the better resolution and the appropriate scaling for our monitors, it looks like this:

Now switch to 

now it looks so after PCDMIS restart on the same monitor

Font and icons seems to be ok but the report window is not really usable without up scaling.

With up scaled settings e.g. 200% in the report window it looks not really nice, moreover the labels inside status

window are not scalable. You need a magnifying glass for this. ;-)

Please fix this behavior. Thanks

We have irregular contours (turtle, Easter eggs, seahorses) and need the area and their from closed scans.

Our competitors are already working with this for a long time.