In the edit window, I would like to be able to copy a set of elements ordered as A-B-C-D and paste them as D-C-B-A.

One filter that I really wish was available for a laser-scan COP is a one that just removes all laser points within x distance of a seam in a solid model.  Trying to get a surface profile measurement of a scanned part is inevitably thrown off because the physical part has had the edges smoothed per drawing requirements, but the model had sharp edges so it shows up as an out-of-tolerance condition.

I'd love to have a filter were I can specify a distance, and then either select individual seam lines or just pick "all seams" to filter out these edge points from the COP.

A .015"/.005" break edge requirement means on a .010-profile surface all of the edges will be out of spec, and the measurement will not be an accurate representation of the part.

Having the ability to see the report window while the report is running or even the edit screen while the program is running in Inspect would help us determine where in the program a fault occurred.  All we can see currently (In 5.1) is the CAD, %, and pass/fail screens

Add BendingStudio to the list of Softwares

My machine has a tool charger that has eight tools. When I start the program from the server, the program tells me that I have some angles that are not calibrated. I then have to manually search the program and calibrate tool by tool. After that I have to exit the program

and to enter again to make sure that I have calibrated all the angles. It is necessary to put a button that, with one click, will mark those in the head that are not calibrated without exiting the program.

Sometimes, I like to check if there is a hole at the right spot, not its coordinates.

or when the left part has a hole, and the right part doesn't.

So could You make a function, that "dives" into a hole, with a depth that I type in, and move to the avoidance distance, before it continues with the next feature?

Customer Request

Trend reports are very important for their operators. They mentioned wanting some kind of way to mark events so that they can understand why dips might have happened (or able to isolate out dates where you know why parts dipped out of tolerance and are not relevant)

Customer Request

Want the ability to merge two reports together. They can have 2 routines for one part, so merging would make it easier to share with customers. (They do this today by cut and pasting in Excel)