Hexagon Measurement      Systems

No matter what Hexagon measurement equipment or software you use, we want to hear your ideas and suggestions on how we can improve.

  • Your feedback and voting will benefit the majority of users.
  • You have 10 votes which you can allocate to your own or other users ideas.
  • We will focus on trying to realize the top voted items in our future products.

Thanks for your assistance in helping us shape the future.

+3

Make clearance cube “clearance offset”

brad traczyk il y a 6 ans dans Metrology Software / PC-DMIS mis à jour par S Wetherell il y a 4 ans 1

make clearance cube, clearance offset by offsetting from cad a set amount to avoid contact 

+3
Terminé

Add AS9102 form three report

Jim Braddock il y a 6 ans dans Metrology Software / PC-DMIS mis à jour par neil kay il y a 5 ans 2

Add the ability to output in AS9102 format

+3
Terminé

Pallet Run with Inspect

F. Ziegler il y a 6 ans dans Metrology Software / Inspect mis à jour par neil kay il y a 5 ans 5

It would be great, if we have the possibility to do the “pallet Run” with Inspect – like Operator Interface. 

Just enter the number of the parts and their offset and let’s go.

If a part does not exist, just uncheck it.


Image 174

Image 175

Image 176


+3

Recall Bend Data from Bend Controller to Tubeshaper

trung van il y a 7 ans dans Metrology Software / TubeShaper mis à jour par neil kay il y a 5 ans 0

Add the ability to have the Bend Controller send "corrected data" to Tubeshaper and updating the CLRA fields only.  Currently as it is, sending corrected data to Tubeshaper replaces the nominal "LRA", which we want to inspect to.

+3
Terminé

CAD things develop

Gábor Tóth il y a 7 ans dans Metrology Software / PC-DMIS mis à jour il y a 4 ans 25

It would be great if I click on CAD part model than is marked(highlighted) in CAD assembly tree too and reverse: If I click on one item in CAD assembly that will be show in CAD window by other color.

Additionaly the marked CAD item can be hide by "I" ( invisible) button, visible again by "V" and "E" exlusive visible only just this item... ( It work an another software and would be great if here will be works similar :-) )


If you like this suggestion press "vote". Thanks!


+3

warn if routine is open in another location

damonh il y a 7 ans dans Metrology Software / PC-DMIS mis à jour par neil kay il y a 5 ans 0

similar to opening a word doc or protected pdf  or cad file, where an instance of that file is already open at another pc or workstation, and a warning pops up that it can only be viewed not edited since it is open somewhere else.  This would come in handy when, programmer needs to make edits, but in another facility the routine is open and running at a cmm. Rather than messaging folks or emailing and waiting for a response and someone to physically go verify it is not open anywhere, to just have a warning message pop up instead.

+3

simple option that FREEZES nominals

kevocmm il y a 7 ans dans Metrology Software / PC-DMIS mis à jour par neil kay il y a 5 ans 0

one of the most frequent complaints is about changing nominals. There have been many different things listed to reduce that having to do with F5 settings and how Alignments are created etc, amounting to many things to seek and tie them down so they dont change. Perhaps pcdmis authors consider this a 'feature' but most users consider it the bain of their existence. It makes them HATE using pcdmis. Why not have 1 simple parameter the user can set that permanently locks the nominals of features and moves etc so that they can not change?

+3
À l'étude

Seperate Tolerance for each Straight or Point

Holger il y a 7 ans dans Metrology Software / TubeShaper mis à jour par NSF_TUN il y a 4 ans 3

Tolerances should be able to be entered separately for each intersection and for each Straight.    The overall tolerance does not always meet the specification,

especially for pipes with holders and connections.

+3
À l'étude

Tube from Zylinders by Clicking the Cylinder in the View.

Holger il y a 7 ans dans Metrology Software / TubeShaper mis à jour par neil kay il y a 5 ans 1

The design of pipes over CAD or measured cylinders should be possible by clicking on the  cylinders and entering the bending radius.             

Currently, this is only possible through the tedious calculation of the intersection points and the rebuilding of a pipe.

+3
À l'étude

Zero Point Alignment / Offset of the Zero Point

Holger il y a 7 ans dans Metrology Software / TubeShaper mis à jour par neil kay il y a 5 ans 2

When we do the Alignement with Plane Line Point, 

the Point should be Zero in XYZ.