Hexagon Measurement SystemsNo matter what Hexagon measurement equipment or software you use, we want to hear your ideas and suggestions on how we can improve.
Thanks for your assistance in helping us shape the future. |
Excel Form Report - allow to change number of exported decimal places independent of report
Allow to change the number of exported decimal places independent of the report (see attached picture).
Or.. if this is too much to change -> force the excel export to always export at 6/7 (mm/inch) decimals.
This would allow to have an easy to read PDF/Print but still retain all the Data in the Excel Export.
At the moment if the PDF/Print is set to 3 decimals the export is also just 3 decimals.
This leads to PDF/Prints that are out of tolerance (shown red) but exports that are shown as in tolerance (wrongly)
Evaluation of Envelope Modifier (ISO 14405-1) In the Report
For reference: I'm using PC-DMIS 2020 R2 SP8.
I've been seeing the E modifier next to dimensions in recent drawings released to the ISO 14405-1 specification. When I go to look at the report to see what the two measurements (LP and GN) look like for a shaft, it appears that the lower limit is the only one that has been assigned a modifier (E) when it's clear that the upper limit was evaluated with the LP modifier and the lower limit was evaluated with the GN modifier.
My issue with the report is: it's not explicitly clear which modifier is being used. This isn't an issue for your average metrologist/CMM programmer, but to the outsider, it can be problematic and cause some confusion.
Can we have an update to the report so that when the E modifier is used, the report clearly states which modifier was used to evaluate the upper/lower limits of a shaft/hole?
I can easily work around this by reporting two separate dimensions with the appropriate modifiers for each, but I shouldn't have to do this.
INSPECT Slideshow - possibility to add additional lines for better assignment of e.g. distance features.
i am currently working in inspect 5.1
Currently, the slideshow does not display well angle, distances etc. that refer to more than one element.
Is it planned to imply the possibility of additional dimension lines?
True position tolerance add on - In Use Legacy Dimension
Dear Team,
During the position tolerance callout, we don't have the separate column for position tolerance update . Instead of that every time we modifying in report callout.
In addition to +/- tolerance, if you provide the position tolerance column it would be very useful.
If any other method available in current state, please let me know.
Regards
Srinivasan N
Inspect Pallet Playlist add multiple pallets with spacing controls
Many customers have large enough machines and smaller parts facilitating the ability to load multiple fixtures on the machine. It would be helpful to have the ability to specify spacing between fixtures to execute sequentially.
This could possibly be done with fixture alignments rather than spacing for provision where the spacing may not be uniform.
Vectors of deviation in CAD protocol
Hello,
we need to have the option to show the vectors of the deviation in our protocol.
It is possible in the graphical window in PC-DMIS, so why isnt it possible in the "CADONLY" protocol e.g.?
Here is a screenshot what I mean:
Thanks in advance
summary view, color scheme, similar to edit window colors
add a color scheme to the summary view, similar to the edit window color scheme that can be saved and recalled.
Can PC-DMIS make a feature that we can measure in a step-file like the way it can in a CAD-program? It can be usefull that you can measure geometry in the step-file before you start a routine
Datum feature in edit feature window
Add a feature in the screen for editing a feature (plane, cylinder, etc) to assign it as a datum instead of going through dimension datum screen and/or gd&t dimension.
Service d'assistance aux clients par UserEcho