Hexagon Measurement      Systems

No matter what Hexagon measurement equipment or software you use, we want to hear your ideas and suggestions on how we can improve.

  • Your feedback and voting will benefit the majority of users.
  • You have 10 votes which you can allocate to your own or other users ideas.
  • We will focus on trying to realize the top voted items in our future products.

Thanks for your assistance in helping us shape the future.

0

Feature Point Display Symbol size default to tip size.

Kingsld1 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 0

Have the feature point symbol default to the current tip size. Handy if you are working in tight spaces. Probably should retain the ability to make it whatever you want; just add a current tip size check box. I know you can change it in CAD and Graphics setup/ Symbols but I'm lazy...... :)

0

Create folder if not exist

Waldemar 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 2

It would be great to add insert folder. The solution with scripting is much too difficult for users.

0

Parameter Editor Dialog Window

davehocum 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 4

Hexagon needs to create a Dialog window that a programmer can change Parameters in the Edit window. With this dialog window a programmer would be able to edit parameters for individual features, selected features or all feature parameters.

Example how a programmer can Highlight Labels in the Graphics window with the Edit Feature Appearance window.

There was also a Global Update program that would change the Parameters of Features and Dimensions. There is an example VB program that is installed with PC-DMIS the Data Field Edit that can edit more than the parameters.

Link to the PC-DMIS forms

Changing the same parameter on alot of features

0

Add a hot key to toggle #1 Clip Plane on and off

TheWhiteSpider 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 0

Add a hot key to toggle #1 Clip Plane on and off.

Currently this is a 4 click process.

0
Отклонен

error in connect=0

Gary 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 2

Is this a hardware issue or software connection issue?

0

Change marker size

dan brokstad 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 1

Ability to change the marker size to bigger when you click on the point cloud (Point Cloud Alignment). Often you click straight through the cloud then you select points.

See this two points, they are clicked very close and one is going thru the top surface on my cloud.
Of course I know the alt- buttom ;-)

Image 23

0

Representing size dimension in report window

Prasanna Sathyanarayanan 8 лет назад в Metrology Software / PC-DMIS обновлен Rob Jensen 4 года назад 1

Most engineering carries specification for size mostly one time whatever the feature may be. There wont be specification separate for upper and lower size's . The fitted geometry would result in multiple size evaluations as specified by the size operator. It looks good if the size reporting carries max and min sizes in a bracket in the reporting window automatically as we are representing the nominal twice in the report window with positive and negative dimension. This could better be single nominal dimension with clear explanation of measured sizes represented as per the specification operator's.

0

Ability to define "paste with pattern" offsets by CAD selection

dave amstutz (djams) 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 0

Title pretty much says it all. I've got a CAD model right there in the CAD window. I'd like to be able to define pattern offsets by clicking on CAD geometry.

0

Having ability to choose the alignment in which values of assignments are given

jean-francois manlay (jefman) 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 0

For example, ASSIGN/V1=QUALTOOLDATA("XYZ", "MY_SPHERE") or ASSIGN/V2=PROBEDATA("vector") are given in STARTUP alignment whatever the actual alignment.

If I want to use them in a prog, I have to recall startup, then create a generic feature and recall the actual alignment...

It would be more simple in actual alignment !

0
Отклонен

scanning irregular with a sheffield controled machine

trobison 8 лет назад в Metrology Software / PC-DMIS обновлен neil kay 5 лет назад 1

To allow the scanning of any shape feature with a Sheffield machine and controler



Сервис поддержки клиентов работает на платформе UserEcho