Romer to CMM program import ability to add move clearances, tips, and angles to run Romer program on CMM with conversion and vise versa CMM to Romer as well. This will improve efficiency by not holding up production.

The CAD assembly tool is very helpful when combining/placing multiple CAD models in the graphics window. Currently, I translate and rotate models into position. This is very effective if models need to be accurately placed. But it takes time, especially for numerous models. It would be helpful if the was a "drag" feature to roughly position models. Especially in the case of fixture components which not not require exact placement or roughly positioned before fine tuning placement.

Have not been able to properly view pathlines in online need to always go to offline to view the path. Online versus offline is difficult to understand to operators. What causes the pathlines to not view properly online?

Different user settings and GUI setup would not be changed by other users.

I'd like to be able to rotate my cad model by clicking and rotating a face of the rotation widget. 

BONJOUR JE SUIS NOUVEAU DANS L'UTILISATION D'UN TRACKER LASER LEICA AT403 SOUS LA PLATFORME PC-DMIS, ON VOULON PRENDRE DES MESUR DIAMETRE OU LONGUEUR ...ETC JE DOIT TOUJOUR RAJOUTER LE DIAMETRE DU REFLECTEUR POUR AVOIR MA VALEUR ET AUSSI QUA?D J'UTILIESE UN SUPPORT MAGNITIQUE JE NE SAIS PAS COMMENT FAIRE POUR RAJOUTER LA VALEUR OU LA HAUTEUR DU SUPPORT MERCI TOUT AIDE ME SERAIS PRECIEUSE