a quicker more accessible option for reporting

We would like to be able to pattern around a specified feature as oppose to having to move the datum to that location, as pattern only operates around the datum.

We have many drawings that have surface profiles, the dimensions may apply to flat, angles, curved, radial and spherical surfaces which have BASIC controls that when reported, do not match the drawing at all, this is due to the fact that when choosing to report a surface profile, the data shown is in Cartesian and no choice for radial or spherical to report. When programming to create a new coordinate that sets the origin to a location and be able to measure radial points or surfaces, the output data needs to have the relationship to match the drawing call out, this helps with making decision on mold making, machining and or part configuration.  Customers also have no correlation of results to drawing, X,Y,Z does not corollate if features are radial or spherical when looking at the surface profile point data to evaluate.

Would like to see and use the threaded holes of the tables, for fixture position and at the same time then we can see where machine can reach.

We would like to be able to filter different areas with different densities. 

While creating a new test program using the QIF model, I had to edit the program and enter different tip angles to measure features on different planes / axis directions. But while the Optimize path workflow is active and the "Ask For Tip" window is open to select the tip angle for the applicable feature, the model CAN NOT be rotated or moved to get a view where this feature is and make a choice on the tip angle, I also can't move the feature labels or hide them for clarity in the Graphics window.

Many years ago i remember changing a setting in the settings editor that would add a space between the dimensions on the report.  I cannot remember where this was.  Currently, we insert a blank report comment to get the space in between.  Does anyone know if this option still exists?

Can we have a 'to points' added on all features. 

would be helpful.

It would be nice to have some kind of identifier next to tips in the probe utility window that you recently calibrated. It would make it so much easier to keep track of what and what I did not calibrate. Something like the notification dots used on smart phones

As Header states, a simple built in label at the end of the program and at a pre header beginning would be very helpful to allow header label modification, easily start over program based on conditional statements, or end program.