It would be usefully to have a possibility to open a routine automaticaly in offline mode while user is pressing the Ctrl key and is selecting the file in open dialog or/and in menue File->Historie.

Similar function to min_circ and max_inscr of a circle.

Potentially using Std.Dev. and allowing to use points only in +% or -% of Std.Dev.

Ex.  I'm using backlight only on gasket material.  It would be useful if
I could Snap the line to the points that are either a minimum or
maximum (depending on material side) To avoid calculations with debris.  In this example lets assume a minimum edge is what I'm looking for.  I select to eliminate 75% of points on the positive side of material (75% of the standard deviation).  I'm then left with 25% of the points to construct a line out of, of which are ignoring 75% of the imperfections seen on the surface.

Make Xact measure report easy to re-arrange so it looks like the Legacy Report.  You can shutoff and turn on whatever you want to go to the printer or stats (in whatever order you want) .  In machining all the machinist cares about is which way they need to move the machine.  All they want to see for Position for example is X, Y, Diameter Size and Position.  They do not want to see datum shift, the position of the datum's you used, the size of the datum used.  The Report is to long and confusing and out of order.

Just finish testing Inspect 3.2. Back saved a 2018 R1 routine to 2017 R1. Closed Pcdmis and open Inspect 3.2. Installed the 2017 R1 add-on. Open the routine using Inspect 3.2 and executed the routine. First warning that the saved default Report template Text and Cad.rpt serialization error. Report template from later version. Nice, then I selected OK and waited for the Pcdmis startup and wait and wait. Finally execution is at 6% then a pause. Forms will not show and there is no CAD window selection either. Let's try 2017 R2. Same issue. Let's try this using 2018 R1 and the forms work as expected. The CAD selection is available now. There should be a warning on what options are available with different version of Pcdmis.

Make possible to set which axis will be displayed in report by default. At this time when I use Xact Measure GD&T almost all axis are selected but I dont want them in report so I need to unselect them all except for those which must be displayed. I need to do that at every single GD&T result but when you change just one alignment all axis will select again and I need to do all the work again and again. It is really annoying. 

In the older versions of PC-DMIS; prior to clearance cube, when using clearance plane you could simply type "move/clearplane" within a non auto feature and if would clear the plane and stay there until it was time to take the next hit. Clearance cube is a superior tool in most regards but I have to add move/points when ever I want to deviate from the path. I would like to have the same kind of thing with the cube; It would be very helpful to have the ability to clear the cube when ever I see fit. Even within auto features and scans. Please ask if you would like me to better clarify.

Ability to close Inspect Launcher
Ability to close Inspect Launcher before the launcher opens Inspect.

it helps when the same program run on different machine that i can know which machine they run on my report and able to make some adjustment per machine type.

Switching from LRA- to ALRA-values is possible just by one click. Not for the corrected values. For those of us who work with ALRA-values, this would be crucial to use the full  functionality of TubeShaper. thanks

The only way to rename the file is to save as then delete the old one. There should be a way to right click then rename the project like you can do with normal files in Windows Explorer.