To my understanding, if you want to "clean up" your edit window, you have to turn off "parameters" and "show hits" individually on every feature.

Can there be an option (Probably under the View menu) to toggle parameters and show-hits ON or OFF for all features?

Add the ability in the distance dimensioning to be able to report the width of an O ring groove between two circles.

I know I am way out there this time but please hear me out.  Please add a surface type auto feature.  No matter the surface I want to be able to create an adaptive scan similar to an auto plane adaptive scan feature, such as perimeter, free form, or teach path.  For example, (bad example but here it is) I don't necessarily want to create a cylinder on a radius surface I want to create an auto surface feature but I don't want it to be constrained to the cylinder parameters I want it to be able to be treated the same as I would create a plane adaptive scan.  Another example would be irregular surface geometry. The reasoning is I want to be able to go through a part and create auto features instead of generic scan features to report the profile of each surface.  I think it could be a valuable tool.  Thank you!  

Have the ability to pull data from sample hit for constructed features.

I have a program with a CAD model in it, but I do not have a model in any other CAD format (stp, igs, prt...) only .cad from PC-DMIS. I need a function to export CAD model from PC-DMIS to other formats like stp and igs.

Situation is: I have only a PC-DMIS program and I need a model because we can not find that model anywhere.

When I import my 1-2-3 blocks for fixturing or whatever I bring in, I would like each of them to be able to have their own clearance cube instead of having to have a large cube encompassing the whole set up.  Sometimes with larger fixtures it would definitely speed things up if the probe didn't think it had to move so far away from my part just because the constraints of the CC are limited to the overall size of my imported fixturing.  And why stop there, also make it where if I don't have a fixture model I can manually set up a cube just for that single fixture piece as well.

Add more information to the calibration results window like: touch speed, scan speed, move speed, prehit/retract distance and so on. It would help to decide if the calibration has to be done again because of differences in these settings.

Here's an example:

Add something like a clearance cube around a probe changer if desired.

Basically like a saftey zone around the rack so that someone cant run probe, probe head, z rail into it while running a program.

Add a field in the lower level matrix calibration dialog box which informs the technician when the last time the lower matrix cal was performed.

When scrolling through a large program it can be difficult to find where you are in the program, even when clicking through bookmarks.

Colour coded markers on the scrollbar might help find bookmarks/breakpoints etc.