By using CAD models, mate parts together the way Solidworks does. It has the ability to click mating center points to lock the XY and the click two mating faces to lock the Z. This would make it easier instead of inputting a XYZ coordinate move.

Is there a way to force field checks on a schedule basis, otherwise the tracker will not measure? Or to at least send a forced notification?

1. If I comp a t-probe tip on one tracker, for a t-probe that will be used on multiple trackers, is there a way to upload that new tip definition to the other trackers through SFx?

2. Can we auto-export all calibration and compensation files to store on an offline server?

This would help users with legacy dimensioning to capture the Per Unit answer and send to stats.

It would be nice to use the software on multiple pcs and "check out" license as needed. I do this with many other types of software and it works great. I'm shocked Hexagon does not utilize this. The license can be parked on my server and be accessed by multiple PC's only allowing the paid number of licenses to login. I'm being told this isn't available for PC DMIS from Hexagon. 

It would be great to be able to build a color map of a measured part based on its comparison with another patter-part and no with its CAD.

This option would be very usefull, for example, in the case where we have 2 parts: at first sight both of the parts have the same dimensions because the results of the measurements of both parts with caliper are similar and both parts are on tolerance with the CAD/drawing, but only one of them could be assembled. So, it would have sense that the difference between them must be on the shape, and the mentioned option would be the best chance to be able to see it.

ASME Y14.5-2009 7.6.2.3 Coaxial Features Without Datum References

This is an ability that I would like to see in PC-DMIS Xact-Measure.

If the call out is per the spec then PC-DMIS should abide by the standard.

Why can't I use the "A-B" cover for concentricity and coaxiality?

References are circles and cylinders.

I'd like to be able to search for a given feature in the ClearanceCube Definition Status Tab.   Scrolling thru a mile long list is not fun.   In an ideal world,  if the Clearance Cube Definition Status tab was open clicking on a feature label in the graphics window would take you to the feature in the Status tab.