Using 2021.1, an "analysisview" command of a feature control frame that uses the "U Modifier" will ONLY allow us to put on the inspection report an "analysisview" of a BILATERAL tolerance band. 

Please add the capability for us to show the tolerance band as UNEQUAL. 

Within the auto elements of  the circle we have the option find hole with adaptive circle scan. Unfortunately this is not possible for concentric circle scan in the auto element of the cilinder. 

It would be an advantage if the "find hole" option would be available for the concentric circle scan of  the auto-element cilinders.

Often when making a point cloud to CAD alignment on sheet metal, the cloud don't fit (see A.JPG).

This is what I think because of the sheet metal can be wrong shape with some degree so it fit better on the opposite side.

I would like to have a CAD Controls in the alignments window (see B.JPG), so I can choose some CAD surface to fit my points (see C.JPG) or you can say as well like "helping the alignment calculation". 

Expected result (see D.JPG).

There are times when you can only measure a portion of a circle with a specific probe orientation. It would be great to be able to create a full circle from two or more partial measures circles.

Add Name setting same as the Excel Form Report - Report Settings dialog window to the Report Window Print Setup – Output Configuration dialog window.

Excel Form Report - Report Settings

Name - This option determines a file name based on your selections from a series of lists. The list provides a trace field value to create a name rule. You must select options from a series of lists that supports the desired report mode.

Idea sample

Add the ability to select GD&T with vision probes.  The system could use measurement strategies for vision or run something similar to autotune to set lighting for each feature on the first execution.

PC Dmis has the ability to keep feature names and add an index number to the name when using paste with pattern.   Being able to do something similar to Dimension names seems like a logical and useful extension.  Dimension names could then match up to a bubbled print.

It would be useful to be able to overide the type of point that PC-DMIS has created when using Quick Features.  It does a very good job of recognizing the type of point based on the CAD surface, but in some cases the programmer may wish to override this.  

The ability to program an Edge Point when the software has (correctly) identified an Angle Point in the CAD is a good example.  

When reporting to Excel via the Excel Form Report, the features being reported are not the same order as is being reported in the report window.  In the Report window the Size is reported first, then the true position and finally the axis locations.  In excel form report, it is axis location, diameter and then true position.