....like the MultiExecute Wizard can do.

I would like a options to quickly hide all scans, or all lines or any other features. I miss a filter where I can select a type of feature to hide or to show (if hidden). 

Allow/Enable the Compatibility of the 3D Connexion Space Mouse (CAD Mouse)

Converter to enable Mitutoyo MCosmos programs to run in PC-DMIS.

When pulling in a Excel from template, one should be able to direct the look up for the templates to a network location and not just the c: drive. In a company with multiple CMM's one would need to maintain a template on several CMM's hard drives instead on one network location to pull the template from. Can this be added in the next revision? 

I suggest adding a “remaining travel” and “next action” display for the 3D CMM, similar to what we have on CNC lathes and milling machines. This would give a clear overview of where the machine will move next, helping to avoid collisions and making it easier to follow what happens during program runs or teaching.

Thanks for considering this! Edit: I accedentally suggested this on Hardware so I wanted to resuggest it here too.

PC-DMIS doesn't allow datum modifiers for perpendicularity on features of size. we see this a lot and would like to see this capability added on.

In select function menu I like to have a "multi select funktion".

So I don't need to reset the cloud every time I need several section.

Customers who manufacture plates for hydrogen fuel cells or heat exchangers usually want their tool halves to be aligned according to the following principle.

1. The tool is aligned with a probe.

2. Then it is scanned with a laser (HP-L-10.10)

3. A Refine alignment is performed with the point cloud.

4. A primary plane is extracted from the point cloud.

5. Aligns as Z primary and Z zero.

6. Evaluates

However, this procedure is not correct as the plane is not exactly parallel to the pattern!

Of course, you can extract points and use these for XY and Z rotation, or construct "alignment features", but I want to use all the points in the pattern area in a easy way.

What I want is more possibilities in the point cloud alignment so that I can control/adjust my alignment better.

Can we have a 'to points' added on all features. 

would be helpful.