This once seems simple but I have yet to find a work around. I am trying to extract data points from MANY scan sets and utilize paste with pattern to do so.

Unfortunately when trying to use this, paste with pattern will auto index everything EXCEPT the bold area, it will stay at SCN1 instead of 1, 2, 3 ect. like everything around it. Not sure why, and I am not sure if there is a way around it, if paste with pattern is not capable to do this I think it should be.

Thanks!

ASSIGN/HITN = MAXINDEX(SCN1.HIT[1..SCN1.NUMHITS].X)

ASSIGN/HITN = MAXINDEX(SCN1.HIT[1..SCN1.NUMHITS].X) 
ASSIGN/MAXVAL = SCN1.HIT[HITN].X

F1 =GENERIC/POINT,DEPENDENT,RECT,$
NOM/XYZ,SCN1.HIT[HITN].TX,SCN1.HIT[HITN].TY,SCN1.HIT[HITN].TZ,$
MEAS/XYZ,SCN1.HIT[HITN].X,SCN1.HIT[HITN].Y,SCN1.HIT[HITN].Z,$
NOM/IJK,0,0,1,$
MEAS/IJK,0,0,1

Currently the way PC-DMIS is if you are using a Precitec type controller for a CWLS system in order to correct the range on the controller for the current lens of use you have to go in EGON Configuration editor (which you should not do unless you really know what you are doing! but I had to) to change the WLS Lens selection.

There is no option to change this within the laser parameters while coding or anywhere in PC-DMIS. This is currently solely controlled by hard code from the configuration. I have 3 different white light sensor lens and in order to change out one to another I have to open EGON every time.

Please add a Forum section for Chromatic White Light Sensor Scanning or laser scanning to share discussions upon using a third probe setup on machines. This would be a huge imporvement.

I cannot find anny topics or discussions on this topic it is fairly new and would be a great addition.

I wish I could insert created views in legacy report. Now I can only recall views and make a screenshot of screen and this is not automated. Creation of complete legacy report take too much time but creating views is simple and faster. Legacy report is saved as PDF document.

Extend Summary mode as more than just a tree view that requires expanding. Make several of the most common features easily accessible (i.e. hits on a circle with +/- buttons, check box for find hole routine in circles, show the features used in an alignment, etc.)

lntroduce self learning packages where a new beginner can learn at home on a simulated software. Step by step training with a library of models from manual alignment to advance features.

Just like MASTERCAM which has excellent training package

a quicker more accessible option for reporting

We would like to be able to pattern around a specified feature as oppose to having to move the datum to that location, as pattern only operates around the datum.

We have many drawings that have surface profiles, the dimensions may apply to flat, angles, curved, radial and spherical surfaces which have BASIC controls that when reported, do not match the drawing at all, this is due to the fact that when choosing to report a surface profile, the data shown is in Cartesian and no choice for radial or spherical to report. When programming to create a new coordinate that sets the origin to a location and be able to measure radial points or surfaces, the output data needs to have the relationship to match the drawing call out, this helps with making decision on mold making, machining and or part configuration.  Customers also have no correlation of results to drawing, X,Y,Z does not corollate if features are radial or spherical when looking at the surface profile point data to evaluate.

Would like to see and use the threaded holes of the tables, for fixture position and at the same time then we can see where machine can reach.