At the Moment it is not possible to adjust the Displayprecision of the Reports, when the Reports are created out of the Report Command --> Print Command.
It will always use the last setting. For example: If I switch inside my PP from Displayprecision "3" to "2" and back to "3" it will use the setting "3" for the whole Report.  I know this is "works as designed" but I kindly ask to make this Parameter available.

Reason I am asking this is that it is not possible to create two Reports out of one Routine (as we all know). Therefore I have to create the Report as a Report command and the use "Copy File" command in PC-DMIS to duplicate the Report. Unfortunately the Report command Report does not take over all my Displayprecision Settings as described above.

Alternatively you could make the Function available to Print the standard Report twice. For standard Reports created with "File --> Printer --> Printer Report Setting" Displayprecision works fine.

On the other Hand: When I set up different Displayprecision settings inside my Routine, why wouldnt I see it on my Report, no matter how it has been created?

Why do I have to Calibrate probes when programming offline? I understand that I have to build the probe but, if I'm offline why wouldn't all of the angles be automatically populated at nominal? If I add a tip angle that wasn't previously there I have to calibrate it before I can edit a feature under it. WHY!!!

The clearplane toggle shows up in the edit window of a feature but not in the edit window code itself, therefore you cannot copy/paste the toggle option.

Similarly, in the measurement strategy editor you cannot set the clearplane toggle to "off". I spend a lot of time updating existing programs that are much too large to reprogram from scratch. the copy/paste parameters tool has sped things up quite a bit. however you are missing the option for "Clear Plane" as well as "Measure Now".

I'd like to see an option to pull the points out of a circle without having to click on the cad to do so.  When i am inside my constructed feature, i wish i could just click the circle and maybe a plus sign next to it so i can get a drop down of what auto points were used to create the circle.  

I think it would help many programmers to be able to copy selected angles from one probe assembly to another one, or at least the ability to create probe angles from the current routine. This would be especially helpful when programming since after measuring several features and have established many tip angles and needing to change what probe is used due to a limitation for whatever reason. ive come across this scenario multiple times already and figured this might be helpful to others.

Allow Ctrl + Shift + arrow keys to highlight text. Not just Shift + arrow keys.

Please allow either scalable or full-screen probe angle grid window.  For users with the 5 Degree and 2.5 Degree head, this will be a quality of life improvement

In the case of new projects, customer requirements for optical 2D line profiles are increasing. Here, we are predefined exact starting and end point. Unfortunately, with PCDMIS you can only define the start and end positions in "approximately", with the mouse. Here it would be nice if the start point and end point could be defined via a menu.

Hi guys

I used Optimize Path in my program. Then I saw the screen with the elements with errors. It continues down the list. I wanted to pull it from the frame edge and see the rest of the list down. The list remains stable. But the framework is growing. Shouldn't I see the rest of the list when I enlarge the frame ?

Regards