Is there an offline viewer available? Something that results can be reviewed?

Ability to change the marker size to bigger when you click on the point cloud (Point Cloud Alignment). Often you click straight through the cloud then you select points.

See this two points, they are clicked very close and one is going thru the top surface on my cloud.
Of course I know the alt- buttom ;-)

Most engineering carries specification for size mostly one time whatever the feature may be. There wont be specification separate for upper and lower size's . The fitted geometry would result in multiple size evaluations as specified by the size operator. It looks good if the size reporting carries max and min sizes in a bracket in the reporting window automatically as we are representing the nominal twice in the report window with positive and negative dimension. This could better be single nominal dimension with clear explanation of measured sizes represented as per the specification operator's.

Title pretty much says it all. I've got a CAD model right there in the CAD window. I'd like to be able to define pattern offsets by clicking on CAD geometry.

For example, ASSIGN/V1=QUALTOOLDATA("XYZ", "MY_SPHERE") or ASSIGN/V2=PROBEDATA("vector") are given in STARTUP alignment whatever the actual alignment.

If I want to use them in a prog, I have to recall startup, then create a generic feature and recall the actual alignment...

It would be more simple in actual alignment !

During execution of vision part program, if a feature fails, the user currently has the option of changing the vision parameters to ensure correct execution. These changes are not saved for future execution, just for the feature to complete in the current execution.

The question here would be: Should this option be available in Inspect as default? If yes, we would lose the control that the Inspect product has. If, No, then we lose a lot of flexability of current execution from Pcdmis

We may want to consider this as an option?

To allow the scanning of any shape feature with a Sheffield machine and controler

I would to specify a subset of a large number of dimensions, and send ONLY this specified subset to QDAS for Statistical Analysis

Be nice to see the pass thru plane as well as the clear plane. Probably would only want it to turn on while you have the cursor on the clear plane code.