When using the 'To points' option in an autofeature, you can give in the name of the plane. In this case 'PL_A3'.

When 'To points' is ticked and you press 'Create', then you will get seperate points with a constructed plane called 'PL_A3'.

The points are named like the last saved featurename for a point.

But I want them named 'PL_A3_PT1, 'PL_A3_PT2', etcetera.

At this moment I have to make a point and call it 'PL_A3_PT1' and make the ID default, and then delete it.

Is it possible that you get something like a popup in wich you can input the name of the first point?

And as a bonus, can you add in that popup the question if you want place the points in a group and what the name of that group should be.

Thanks.

Gr. Wesley.

I would like to see controls for path lines animations which can be changed during animations. This controls would be Play, Pause, Speed change + & -, how many last path lines can be seen (only 10, 20 or xx last path lines). Now it is hard to see new path lines when there are a lot of previous path lines.

Please update Quick Fixture and add some new hardware like the stuff from Phillips Precision(Inspection Arsenal), Rayco Fixture, Renishaw(R&R Fixture), and etc.

Also, it would be nice to have typical tools of the trade like 1-2-3 Block, 2-4-6 Block, V-Block, Vise, & etc inside of this feature also.

This feature is really helpful for offline programming to help aid operators trying to figure out a setup from programmers.

GD&T capture is very impressive with Trupo callouts. Would like it to include everything from a print.  Distance, Basic, Notes, Find numbers and Database Ballooning.  Name the feature with the GD&T.  Then output into AS9100 format Excel file.

When calculating angles current method does not inform user which angle is being calculated.  Need ability to differentiate which angle is being calculated 3d or2D from axis view similar to current distance options.

We measured an inner cone as an element and want to construct a ball with a fixed diameter of Ø19 in the cone (see picture). The goal is to determine the distance of 25.1( see Picture). Currently we construct a circle (Tangent) into two lines.

Make it possible to create an angle point using CAD when there is a radius between the two surfaces.

This comes up on nearly every molded part I measure and on most sheet metal parts.

User Interface could be to click on the first surface like it is currently done. If there is a radius (or empty space) between the two surfaces, press Alt and click on the second surface, then click on Create. Have the first click define where the angle point is to be taken at. If there is no radius then just click on Create and process as currently done.

Vote

an overhaul/update of the basic script editor portion of the software would boost the

automation capabilities.

a more comprehensive help file with examples and add "intellisense" the the script editors

tool kit would allow more users to learn scripting and therefore develop programming methods

and custom scripts to automate.