Idéer
+2
Create a full circle from two or three separate partial circles.
Daniel Pearce 4 år siden
i Metrology Software / PC-DMIS
•
opdateret af Barry Buechner (bfire85) 4 år siden •
1
There are times when you can only measure a portion of a circle with a specific probe orientation. It would be great to be able to create a full circle from two or more partial measures circles.
Kundesupport af UserEcho
You can by using .HIT functionality within the circle construction. But yes, it would be easier to just select the semi-circles you want and it creates a circle out of that.
CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,0>,<0,0,1>,5
ACTL/<0,0,0>,<0,0,1>,5
TARG/<0,0,0>,<0,0,1>
START ANG=0,END ANG=120
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=8,DEPTH=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=2.54
AVOIDANCE MOVE=NO,DISTANCE=38.1
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,0>,<0,0,1>,5
ACTL/<0,0,0>,<0,0,1>,5
TARG/<0,0,0>,<0,0,1>
START ANG=121,END ANG=240
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=8,DEPTH=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=2.54
AVOIDANCE MOVE=NO,DISTANCE=38.1
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
CIR3 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,0>,<0,0,1>,5
ACTL/<0,0,0>,<0,0,1>,5
TARG/<0,0,0>,<0,0,1>
START ANG=241,END ANG=359
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=8,DEPTH=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=2.54
AVOIDANCE MOVE=NO,DISTANCE=38.1
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
CIR4 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<0,0,0>,<0,0,1>,5
ACTL/<0,0,0>,<0,0,1>,5
CONSTR/CIRCLE,BF,2D,CIR1.HIT[1..CIR1.NUMHITS],CIR2.HIT[1..CIR2.NUMHITS],CIR3.HIT[1..CIR3.NUMHITS],,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,UPR=0