General toleranc classes (maps)

Now when I insert distance dimensions I have to write down the nominal value and tolerance for each dimension. I would like to see PC-DMIS fill the tolerance zones according to nominal dimension (if I choose it; checkbox)  and chosen standard (ISO 2768, DIN16742 TG1-TG8, ISO 16901, ...) (PC-DMIS remember chosen standard within program). Something similar is in Location dimensions but it is only for holes and shafts. I also miss a tool or manual to create my own tolerance maps for standards we used and common tolerances on drawings ( +/- 0.05mm; +/- 0.1mm;+/- 0.2mm;+/- 0.3mm). To sum what I want, more flexibility and automation filling the tolerances for distance and location dimensions.