Hi guys,

It's like the Normal View button on Catia.

See below picture..

Use case: Looking for password protection for individual routines, We have the same version of pc-dmis just 1 online version used by 2 or 3 different users for creating and executing programs. User A wants to lock the program for editing. But any user should be in a position to execute that particular program without having to edit. if editing is required, it should be done by User A or one with a known password. Same for User B, C, etc., In this way user A keeps modifying his own written programs without allowing access to other users.  Somewhat similar I know is supported by Protect of PC-DMIS, but the workflow I look for is simple and easy, protect is a much mixed and complicated workflow.  just have an option to lock it whenever required without having to install add-ons. etc., 

Allow R (Radius) or Ø for features in FCF 

Currently PC DMIS Software only allows Ø callout in FCF except in the Legacy FCF. I have drawing callouts where a Radius is used [ SEE ATTACHED PNG] This causes MMC to be incorrectly reported. Even the legacy does not allow Both R and Ø callouts to be reported differently in a single True Position FCF. You must choose one or the other and Primary Feature and Datum features will be reported as all R or all Ø. I would like to be able to report both R and Ø as needed in any True Position FCF.

Clearance cube works well for square/rectangle parts but not ideal for cylindrical shaped parts. A clearance cylinder would work well for round parts that have features i.e. circles etc... on the outer perimeter of the cylinder.

Expand Auto Features  to include Auto Edge Line and Auto Edge Circle.  I often used Edge points in the construction of lines and circles.  Screen gets crowded with points that have to be hidden to see other features.   It's an unneeded complication

When using "Set Custom Order" in Excel Form Reports, Allow to high-light fields and drag the whole group into the desired position. 

Adding an option to build an alignment from datum features that have been measured and defined. This would allow for quick manual GD&T compliant alignments in the same manner GeoTol already does.

Constantly having to check the box for "Circular moves" when picking up Tooling Spheres in DCC. It should default to circular moves when measuring spheres! I understand there is an option in F5 to "Use circular moves on round features", but I only want to apply this to spheres.

When a feature isn't executed, because of a partial execution, then the related dimension will turn red. This is confusing for the user, because you'll think the dimension has a out of tolerance. 

Suggestion: Give another color than red for elements which are skipped.