Hexagon Measurement      Systems

No matter what Hexagon measurement equipment or software you use, we want to hear your ideas and suggestions on how we can improve.

  • Your feedback and voting will benefit the majority of users.
  • You have 10 votes which you can allocate to your own or other users ideas.
  • We will focus on trying to realize the top voted items in our future products.

Thanks for your assistance in helping us shape the future.

0

auto rotate and zoom when probing

Sevdi Guler vor 3 Jahren in Hardware / Portable Measuring Arms aktualisiert vor 2 Jahren 2

I would like to see auto-rotate and zoom depending on Probe orientation   dynamically when I use hard probe with arms. just like scanning

0

Place an LED light across underneath of bridge to illuminate the work area.

paul grant vor 3 Jahren in Hardware / Coordinate Measuring Machines aktualisiert von Kingsld1 vor 3 Jahren 1
0

Leitz Senmation / PC-DMIS compatability

Julian vor 4 Jahren in Hardware / Sensors 0

Why cant PC-DMIS control all of the senmation options? I should not need quindos . it puts a burden on the ability to stay with Leitz when I need more options. ZEISS runs all of theirs seamlessly in Calypso..I want my Leitz to do that!!

0

RS6 scanner for all devices

Sevdi Guler vor 4 Jahren in Hardware / Sensors 0

Integrate RS6 scanner to all devices. to CMM for HPLs, To tracker for T-scan-Las.

0

Rotatable spacer for TP20 star probes

Kingsld1 vor 4 Jahren in Hardware 0

I've never been a fan of star probes. Not to say that I haven't used them. It's more that I haven't figured out the trick to consistently and easily orient the 'star' on a TP 20 setup. Worked with a Zeiss with a Vast head for a few years. That was somewhat manageable. Seems to me that you would need some kind of hardware solution for this. Some kind of rotatable element to go in between the TP20 and your probe head. Wouldn't have to rotate 360 degrees. 90 degrees of rotation would probably be enough.

0

Probe head B angles only

Bill Kulpa vor 5 Jahren in Hardware / Coordinate Measuring Machines aktualisiert von neil kay vor 5 Jahren 0

This is a hardware request only.

I'd like to have a probe head with only B angles for rotation of star probes.


0

Motorized probe magazine

Bill Kulpa vor 5 Jahren in Hardware / Coordinate Measuring Machines aktualisiert von ALBERT706 vor 4 Jahren 4

Develop a motorized probe magazine much like every machining center has.

That way it could be mounted in the dead space at the end of the Y axis of most machines.

When a probe change is needed PC-DMIS would move the machine to a predetermined point for that port, the port would extend to the Z rail and unload or load a new probe. This would allow better use of the measuring envelop and enable use of that dead space at the end of the machine.


0

NJB001 How to Get the slow key "Turtle" Out of of locked Mode.

michelle daggar vor 6 Jahren in Hardware / Coordinate Measuring Machines aktualisiert von neil kay vor 5 Jahren 0
0

Automatic sensor in probe changer

Bill Kulpa vor 7 Jahren in Hardware / Coordinate Measuring Machines aktualisiert vor 2 Jahren 1

Have a proximity switch or LVDT in the probe changer to automatically tell PC DMIS which docking ports that have probe assignments are empty.