When using the graphic views toolbar or clicking on the rotation widget sides, I'd like the cad to scale to fit to the graphics display window. If memory serves, this was the case back in 2011 but in subsequent releases has rotated the cad sometimes off the screen, sometimes ending up only showing part of the model on screen. 

When I save down from a newer version I'd like all the related object in the routine to save down with it.

I use a lot of forms and report label templates so I'm constantly running from the production floor back to my desk to save each part of the puzzle down to the version running on that CMM..

I know what people are going to say, why not 1 version for everything.

We do our testing offline before migrating to the production machines.

And with 15 CMM's we can't always count on the newer versions working with a particular controller.

when editing the tolerances zones (+,-), and the zone is a bilateral equally disposed zone, have a setting where the warning message will then change the pos and neg allowance at one time, rather than having the message pop up for both the pos and neg tolerance.  This can be accomplished currently by keying in the value and tabbing to the next value, however, there are times when using a ten-key pad and mouse, that this is not as user friendly (tenkey pad doesnt typically have a tab key on it).

save per serial number, date time was measured, default location,...

Romer to CMM program import ability to add move clearances, tips, and angles to run Romer program on CMM with conversion and vise versa CMM to Romer as well. This will improve efficiency by not holding up production.

The CAD assembly tool is very helpful when combining/placing multiple CAD models in the graphics window. Currently, I translate and rotate models into position. This is very effective if models need to be accurately placed. But it takes time, especially for numerous models. It would be helpful if the was a "drag" feature to roughly position models. Especially in the case of fixture components which not not require exact placement or roughly positioned before fine tuning placement.

Have not been able to properly view pathlines in online need to always go to offline to view the path. Online versus offline is difficult to understand to operators. What causes the pathlines to not view properly online?